Reproofing turnout gear
Reproofing restores the gear's repellency to water and oil. But it contains chemicals that the person applying it must be protected from.
What reproofing does
Reproofing restores the outer shell's repellency to water and, with fluorinated types, also to oil and chemicals. It is applied to clean gear after washing, by spraying or in the washing machine. Machine reproofing is not suitable for the whole garment, because the inner thermal liner gets impregnated too. This does not apply to gear that can be taken apart: you then put only the outer shell in the machine and reproof just that layer. Use only a reproofing product approved by the gear manufacturer for that garment, and follow its instructions.
Reproofing products for firefighter gear are mostly based on fluoropolymers, i.e. substances from the PFAS group. They typically contain around 8% PTFE (Teflon). Field experience
Protection during application
Reproofing is not harmless garment care. Reproofing products for firefighters contain fluoropolymers from the PFAS group, and sprays also contain solvents and propellants. PFAS are very persistent in the environment and in the body, and they accumulate. In 2023 the International Agency for Research on Cancer (IARC) classified perfluorooctanoic acid (PFOA) as carcinogenic to humans. Firefighters encounter PFAS elsewhere too, so it makes sense to limit every unnecessary extra exposure.
Substances from reproofing products enter the body in three ways: by inhaling the aerosol when spraying, through the skin, and by mouth when they get from dirty hands onto food or a cigarette. Cases of lung injury after inhaling waterproofing spray have been described. In one of them, a man ended up in hospital after smoking cigarettes with hands contaminated by the product (Scheepers et al., 2017).
Spray only with respiratory protection. Spraying creates a fine aerosol, and inhaling it can damage the lungs. Ideally use breathing apparatus. If that is not possible, at least a full-face mask or half mask with a combined A2P3 filter and tight-fitting goggles. Spray outdoors or in a well-ventilated area, wear nitrile gloves, keep other people away and wash your hands before eating or smoking. For gear that can be taken apart, reproofing the outer shell in the washing machine is safer, as it creates no aerosol.
What to wear and how to work
- Before you start, read the product's safety data sheet and follow it.
- Respiratory protection: ideally breathing apparatus, otherwise a full-face mask or half mask with a combined A2P3 filter.
- Nitrile gloves and tight-fitting goggles if you do not have a full-face mask.
- A disposable coverall or a long-sleeved apron, so the product does not get onto your clothes and skin.
- Work outdoors or in a well-ventilated area and keep other people away.
- Do not eat, drink or smoke while working. Wash your hands and face afterwards.
- Dispose of single-use protective items and empty containers according to the safety data sheet.
Drying after reproofing
Ideally use a dryer that vents warm air outside the building or a condenser dryer. The Teflon (PTFE) itself does not evaporate at drying temperatures. Heat does, however, release volatile fluorinated substances from the reproofing, such as fluorotelomer alcohols, and tumbling sheds fine fibres carrying reproofing residues. Drying cabinets that only recirculate the air spread them around the room. Clean the dryer filter wearing gloves. Field experience and expert judgement
PFAS-free reproofing
Fluorine-free products are also available, for example based on silicones (polysiloxanes), hydrocarbons and waxes (paraffin) or dendrimers. They repel water about as well as fluorinated ones, but oil and diesel much less. In a US study, the diesel repellency of PFAS-free gear dropped from about 80% to 40% after simulated ageing (Mazumder et al., 2023). Before using a PFAS-free product, check with the gear manufacturer that it is approved.